Bandejas y pisones fabricados por Packer Brothers están hechos para resistir el abuso de la obra. Desde compactación del suelo, la grava al trabajo trinchera Packer Brothers pisón es la elección correcta. Desarrollado por Honda, Subaru motores de gas, en Leeson eléctrica 110v / 220v y el motor de aire que la oferta de opciones.

Pase el ratón o haga clic sobre las imágenes abajo para ver una descripción más detallada

Vea nuestra tienda Outlet de precios directos de fábrica!

Viendo 1 to 12 (12 Total)

Roller / Paver Compactor PB193

 

Roller / Paver Compactor PB193

 

PB193 Rubber Roller Paver Compactor

Small Block Compactor Compacts Paving Brick

  • Four rubber rollers are equipped transforming compaction to be efficient
  • Keeps lowest damage on compacting brick.
  • Standard with a Champ FX200, Also available with a Honda.

Special compact design to make the surface smooth, by transmitting vibration through vibrating plate, which power generated from single rotor in vibrator case.

SPECS:

Weight    181 lbs

Speed     11" Sec             Force      3500 lbs

Depth      10 "                    Plate size  16.5"x23.5"

This paver compactor with rollers is only suitable for paving brick work and is not suitabe for soil.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at paul@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Roller / Paver Compactor PB193

 

PB193 Rubber Roller Paver Compactor

Small Block Compactor Compacts Paving Brick

  • Four rubber rollers are equipped transforming compaction to be efficient
  • Keeps lowest damage on compacting brick.
  • Standard with a Champ FX200, Also available with a Honda.

Special compact design to make the surface smooth, by transmitting vibration through vibrating plate, which power generated from single rotor in vibrator case.

SPECS:

Weight    181 lbs

Speed     11" Sec             Force      3500 lbs

Depth      10 "                    Plate size  16.5"x23.5"

This paver compactor with rollers is only suitable for paving brick work and is not suitabe for soil.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at paul@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Packer Brothers Roller - Packer Convertible

 

Packer Brothers Roller - Packer Convertible

 

Packer Brothers Small Asphalt Patcher Roller

  • Easily Converts to a Plate Compactor
  • Powered By Honda GX160 5.5hp
  • Built Tough
  • Great for Tar Patch Work
  • 12" Roller

This machine can really work for you. Converts to a small 12" plate compactor. Great for tight areas.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Packer Brothers Roller - Packer Convertible

 

Packer Brothers Small Asphalt Patcher Roller

  • Easily Converts to a Plate Compactor
  • Powered By Honda GX160 5.5hp
  • Built Tough
  • Great for Tar Patch Work
  • 12" Roller

This machine can really work for you. Converts to a small 12" plate compactor. Great for tight areas.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

PB72 Light Weight Rammer

 

PB72 Light Weight Rammer

 

 The big news in rammers is  ready for delivery. Hard working yet extremely compact. Whether used for quick patch work or precision compaction around a fragile foundation... call us to reserve yours!

4- stroke (no mixing gas) HONDA GX35

Specifications: 

Foot size: 5.5" Wide x 10"  
Weight: 72 Lbs. 
Frequency vpm: 880 
Force: 2300 lbs. 
Jumping height: 1.7- 2.2 inches 

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

PB72 Light Weight Rammer

 

 The big news in rammers is  ready for delivery. Hard working yet extremely compact. Whether used for quick patch work or precision compaction around a fragile foundation... call us to reserve yours!

4- stroke (no mixing gas) HONDA GX35

Specifications: 

Foot size: 5.5" Wide x 10"  
Weight: 72 Lbs. 
Frequency vpm: 880 
Force: 2300 lbs. 
Jumping height: 1.7- 2.2 inches 

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Walk Behind Convertible Double Roller - Compactor PBDR

 

Walk Behind Convertible Double Roller - Compactor PBDR

 

Highly portable but still stable and agressive enough to get the job done fast! This double roller walk behind compactor can convert to a conventional plate compactor, giving you unheard of versitility from one piece of equipment.

As shown, the PBDR has a 17" wide roller and weighs 268lbs but can be increased to 310lbs with water added to the drums. With the optional water tank added, the total weight can hit 358lbs.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Walk Behind Convertible Double Roller - Compactor PBDR

 

Highly portable but still stable and agressive enough to get the job done fast! This double roller walk behind compactor can convert to a conventional plate compactor, giving you unheard of versitility from one piece of equipment.

As shown, the PBDR has a 17" wide roller and weighs 268lbs but can be increased to 310lbs with water added to the drums. With the optional water tank added, the total weight can hit 358lbs.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Battery Powered Electric Rammer PB78E 24V

 

Battery Powered Electric Rammer PB78E 24V

 

Packer Brothers Battery Powered Electric Rammer PB78 24 Volt

  • Run Time 20 min. Before Battery Change. ( Longer Run Times Available.)
  • Custom Made 24v Leeson Rammer Motor
  • Heavy Duty Wiring & Switch
  • Heavy Duty Clutch
  • Rugged Built, Well-balanced
Specifications:

Plate size: 9” x 11” 
Dimensions: 31” x 16” x 41” 
Weight: 148 Lbs.
Frequency vpm: 640
Force: 2750 lbs.
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

The Packer Brothers Battery Powered Tamper is manufactured with the contractor in mind. From the over-spec wiring to the 24 volt rechargable power source. Powered By two AGM Batteries, no worries with exhaust fumes or loud engine noise. The motor protector cage also doubles as a extra motor support to ensure durability. Packer Brothers Battery operated Tamping Rammer jumping jack is a soil tamper made tough from the ground up. Don't have power? This is the right compactor for the job. If you want custom construction equipment give Packer Brothers a call.
 
** A designated 10 ga. Cord with twist lock is not recommended more than 25 feet.Others cords, plugs, adapters, and  cords with extended lengths will void all warranties. Equipment must run on a designated 20 amp breaker. Verify power and amp availability before use. Not recommended to run off a generator. **

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Battery Powered Electric Rammer PB78E 24V

 

Packer Brothers Battery Powered Electric Rammer PB78 24 Volt

  • Run Time 20 min. Before Battery Change. ( Longer Run Times Available.)
  • Custom Made 24v Leeson Rammer Motor
  • Heavy Duty Wiring & Switch
  • Heavy Duty Clutch
  • Rugged Built, Well-balanced
Specifications:

Plate size: 9” x 11” 
Dimensions: 31” x 16” x 41” 
Weight: 148 Lbs.
Frequency vpm: 640
Force: 2750 lbs.
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

The Packer Brothers Battery Powered Tamper is manufactured with the contractor in mind. From the over-spec wiring to the 24 volt rechargable power source. Powered By two AGM Batteries, no worries with exhaust fumes or loud engine noise. The motor protector cage also doubles as a extra motor support to ensure durability. Packer Brothers Battery operated Tamping Rammer jumping jack is a soil tamper made tough from the ground up. Don't have power? This is the right compactor for the job. If you want custom construction equipment give Packer Brothers a call.
 
** A designated 10 ga. Cord with twist lock is not recommended more than 25 feet.Others cords, plugs, adapters, and  cords with extended lengths will void all warranties. Equipment must run on a designated 20 amp breaker. Verify power and amp availability before use. Not recommended to run off a generator. **

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Vibratory Roller PB388 Hydraulic

 

Vibratory Roller PB388 Hydraulic

 

PB388 PACKER BROTHERS Vibratory Roller MSRP 7571.00

Standard with Champ FX200, Available with a Honda GX160Hydraulic Roller

VPM      4300                 Weight    441 lbs                   Roller size  23"

Force    3100                 Water Tank 4.5 Gal                Speed 0 - 2mph

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Vibratory Roller PB388 Hydraulic

 

PB388 PACKER BROTHERS Vibratory Roller MSRP 7571.00

Standard with Champ FX200, Available with a Honda GX160Hydraulic Roller

VPM      4300                 Weight    441 lbs                   Roller size  23"

Force    3100                 Water Tank 4.5 Gal                Speed 0 - 2mph

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Electric Rammer PB78E

 

Electric Rammer PB78E

 

Packer Brothers Electric Rammer PB78 110 Volt

MADE IN THE USA

  • Rugged Built, Well-balanced
  • Custom Made 110v Electric Motor
  • Heavy Duty 30 Amp switch, Twist Style Plug
  • Heavy Duty Clutch

 Specifications:

Plate size: 9” x 11” 
Dimensions: 31” x 16” x 41” (78cm x 40cm x 105cm)
Weight: 148 Lbs.
Frequency vpm: 680
Force: 2800 lbs.
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

 The Packer Brothers Rammer is manufactured with the contractor in mind. From the twist lock plug to the easy-to-find 110-volt electricity power source. Electric powered, no worries with exhaust fumes or loud engine noise. The motor protector also doubles as extra motor support to ensure durability. Packer Brothers Electric Tamping Rammer jumping jack is a tamper made tough from the ground up. If you want custom construction equipment give Packer Brothers a call.

 
** A designated 10 ga. Cord with twist lock is not recommended more than 25 feet.Others cords, plugs, adapters, and  cords with extended lengths will void all warranties. Equipment must run on a designated 20 amp breaker. Verify power and amp availability before use. Not recommended to run off a generator. **
 
For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.
 

Electric Rammer PB78E

 

Packer Brothers Electric Rammer PB78 110 Volt

MADE IN THE USA

  • Rugged Built, Well-balanced
  • Custom Made 110v Electric Motor
  • Heavy Duty 30 Amp switch, Twist Style Plug
  • Heavy Duty Clutch

 Specifications:

Plate size: 9” x 11” 
Dimensions: 31” x 16” x 41” (78cm x 40cm x 105cm)
Weight: 148 Lbs.
Frequency vpm: 680
Force: 2800 lbs.
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

 The Packer Brothers Rammer is manufactured with the contractor in mind. From the twist lock plug to the easy-to-find 110-volt electricity power source. Electric powered, no worries with exhaust fumes or loud engine noise. The motor protector also doubles as extra motor support to ensure durability. Packer Brothers Electric Tamping Rammer jumping jack is a tamper made tough from the ground up. If you want custom construction equipment give Packer Brothers a call.

 
** A designated 10 ga. Cord with twist lock is not recommended more than 25 feet.Others cords, plugs, adapters, and  cords with extended lengths will void all warranties. Equipment must run on a designated 20 amp breaker. Verify power and amp availability before use. Not recommended to run off a generator. **
 
For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.
 

Power Rammer PB78 Honda

 

Power Rammer PB78 Honda

 

Packer Brothers Tamping Rammer PB78

  • Heavy duty throttle control
  • Honda 3hp.
  • High quality gas tank
  • Anti-vib mounts that work

MSRP  3298.00

Specifications:

Plate size: 10” x 11” 
Dimensions: 31” x 16” x 41” (78cm x 40cm x 105cm)
Weight: 132 Lbs. 
Frequency vpm: 680
Force: 2900 lbs.
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

Packer Brothers Rammer tamper. Trench compacting at it's best easy in and out. Our tamping rammer is built tough to last. 

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Power Rammer PB78 Honda

 

Packer Brothers Tamping Rammer PB78

  • Heavy duty throttle control
  • Honda 3hp.
  • High quality gas tank
  • Anti-vib mounts that work

MSRP  3298.00

Specifications:

Plate size: 10” x 11” 
Dimensions: 31” x 16” x 41” (78cm x 40cm x 105cm)
Weight: 132 Lbs. 
Frequency vpm: 680
Force: 2900 lbs.
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

Packer Brothers Rammer tamper. Trench compacting at it's best easy in and out. Our tamping rammer is built tough to last. 

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Power Rammer PB90

 

Power Rammer PB90

 

Packer Brothers PB90 RAMMER 4hp Loncin Engine OHV

MSRP  2995.00

Specifications: 
Plate size: 13” x 12” (29 x 27cm) 
Dimensions: 28” x 20” x 41” (62cm x 42cm x 105cm) 
Weight: 170 Lbs. (76Kg) 
Frequency vpm: 600 
Force: 2500 lbs. 
Jumping height: 1.7 – 3 inches (45 – 65 mm)

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Power Rammer PB90

 

Packer Brothers PB90 RAMMER 4hp Loncin Engine OHV

MSRP  2995.00

Specifications: 
Plate size: 13” x 12” (29 x 27cm) 
Dimensions: 28” x 20” x 41” (62cm x 42cm x 105cm) 
Weight: 170 Lbs. (76Kg) 
Frequency vpm: 600 
Force: 2500 lbs. 
Jumping height: 1.7 – 3 inches (45 – 65 mm)

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Power Rammer PB98 Honda 3hp

 

Power Rammer PB98 Honda 3hp

 

Packer Brothers PB98 Rammer 3.0 OHV GX100 Honda

MSRP  3395.00

3.0 OHV 4- stroke (no mixing gas) HONDA GX100

Specifications: 
Plate size: 10” x 12” (26 x 30cm) 
Dimensions: 31” x 16” x 41” (78cm x 40cm x 105cm) 
Weight: 180 Lbs. (82Kgs.) 
Frequency vpm: 680 
Force: 3000 lbs. 
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Power Rammer PB98 Honda 3hp

 

Packer Brothers PB98 Rammer 3.0 OHV GX100 Honda

MSRP  3395.00

3.0 OHV 4- stroke (no mixing gas) HONDA GX100

Specifications: 
Plate size: 10” x 12” (26 x 30cm) 
Dimensions: 31” x 16” x 41” (78cm x 40cm x 105cm) 
Weight: 180 Lbs. (82Kgs.) 
Frequency vpm: 680 
Force: 3000 lbs. 
Jumping height: 1.7 – 2.2 inches (45 – 55 mm)

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Rammer Foot Extension

 

Rammer Foot Extension

 

Packer Brothers PB98 Rammer Extension Foot

MADE IN THE USA

MSRP          369.00

Our Cost     259.00

You Save     110.00

Specifications:
Plate size: 9” x 4”  x12" Tall
Weight: 16 Lbs.

Solid Steel Construction

Packer Brothers Rammer Jumping Jack Tamper Narrow 4"  Foot Extension Trench Extension

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs. 
 

 

Rammer Foot Extension

 

Packer Brothers PB98 Rammer Extension Foot

MADE IN THE USA

MSRP          369.00

Our Cost     259.00

You Save     110.00

Specifications:
Plate size: 9” x 4”  x12" Tall
Weight: 16 Lbs.

Solid Steel Construction

Packer Brothers Rammer Jumping Jack Tamper Narrow 4"  Foot Extension Trench Extension

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs. 
 

 

Electric Rammer PB98 220v

 

Electric Rammer PB98 220v

 

(Obsolete model, see new PB178e for current offering)

Specifications:

Plate size: 10 x 12 inch (26 x 30cm)
Dimensions: 31 x 16 x 41 inch (78cm x 40cm x 105cm)
Weight: 168 Lbs.
Frequency vpm: 680
Force: 3000 lbs.
Jumping height: 1.7 to 2.2 inches (45 to 55 mm)

Heavy Duty 30 Amp switch, Twist Style Plug

Heavy Duty Clutch ( Made USA )

3hp. Leeson 220v Electric Motor

 

** A designated 10 ga. Cord with twist lock is not recommended more than 25 feet.Others cords, plugs, adapters, and cords with extended lengths will void all warranties. Equipment must run on a designated 20 amp breaker. Verify power and amp availability before use. Not recommended to run off a generator. **

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Electric Rammer PB98 220v

 

(Obsolete model, see new PB178e for current offering)

Specifications:

Plate size: 10 x 12 inch (26 x 30cm)
Dimensions: 31 x 16 x 41 inch (78cm x 40cm x 105cm)
Weight: 168 Lbs.
Frequency vpm: 680
Force: 3000 lbs.
Jumping height: 1.7 to 2.2 inches (45 to 55 mm)

Heavy Duty 30 Amp switch, Twist Style Plug

Heavy Duty Clutch ( Made USA )

3hp. Leeson 220v Electric Motor

 

** A designated 10 ga. Cord with twist lock is not recommended more than 25 feet.Others cords, plugs, adapters, and cords with extended lengths will void all warranties. Equipment must run on a designated 20 amp breaker. Verify power and amp availability before use. Not recommended to run off a generator. **

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at parts@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 
Viendo 1 to 1 (1 Total)

Roller / Paver Compactor PB193

 

Roller / Paver Compactor PB193

 

PB193 Rubber Roller Paver Compactor

Small Block Compactor Compacts Paving Brick

  • Four rubber rollers are equipped transforming compaction to be efficient
  • Keeps lowest damage on compacting brick.
  • Standard with a Champ FX200, Also available with a Honda.

Special compact design to make the surface smooth, by transmitting vibration through vibrating plate, which power generated from single rotor in vibrator case.

SPECS:

Weight    181 lbs

Speed     11" Sec             Force      3500 lbs

Depth      10 "                    Plate size  16.5"x23.5"

This paver compactor with rollers is only suitable for paving brick work and is not suitabe for soil.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at paul@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.

 

Roller / Paver Compactor PB193

 

PB193 Rubber Roller Paver Compactor

Small Block Compactor Compacts Paving Brick

  • Four rubber rollers are equipped transforming compaction to be efficient
  • Keeps lowest damage on compacting brick.
  • Standard with a Champ FX200, Also available with a Honda.

Special compact design to make the surface smooth, by transmitting vibration through vibrating plate, which power generated from single rotor in vibrator case.

SPECS:

Weight    181 lbs

Speed     11" Sec             Force      3500 lbs

Depth      10 "                    Plate size  16.5"x23.5"

This paver compactor with rollers is only suitable for paving brick work and is not suitabe for soil.

For all your shipping inquiries, please feel free to reach out to us! You can contact us directly at 612-414-8081 or email us at paul@packerbrothers.com. Our dedicated team is here to assist you and provide the best shipping solutions for your needs.